|

|
Linksys WAP200 Wireless-G Access Point |
| WAP200 Wireless-G
Access Point |
#WAP200
List Price: $163.00
Our Price: $129.99 |
|
Linksys WAP200 Overview:
Wireless-G Access Point with Power Over Ethernet and RangeBooster High-Speed Wireless Access for Existing Networks!
RangeBooster technology is a compatible add-on to standard
Wireless-G which increases your wireless network's range up
to two times, and its throughput by up to 35%. Unlike ordinary
wireless technologies that are confused by signal reflections,
RangeBooster uses two smart receivers at each end to detect
and decode reflected signals at distances where standard technologies
give up. You'll find that "dead spots" in the wireless coverage
area are reduced, too.
The Advanced security features makes this solution ideal
for your Business. Advanced wireless security using Wi-Fi Protected
Access™ (WPA2 Enterprise) with up to 256-bit encryption, and
the new Wireless Security Monitoring functionality gives your
business the visibility and protection it needs. Used when Linksys
200-Series Wireless Adapters are present, the Wireless Security
Monitoring functionality alerts you of possible wireless intruders,
vulnerabilities in the wireless deployment, and visibility into
Denial of Service attacks.
The Linksys WAP200 Access Point lets you connect Wireless-G
(802.11g) or Wireless-B (802.11b) devices to your wired network
so you can add PCs to the network with no cabling hassle. Power
over Ethernet support makes it easy to install -- you can mount
the Access Point anywhere, even without ready access to a power
plug. With appropriate Power Over Ethernet support at the other
end, you only need to run one cable to the Access Point to deliver
both data and power. Of course, you can also use the included
AC adapter if your installation point has power available nearby.
Moreover, the integrated QoS features provide consistent
voice and video quality on both the wired and wireless networks,
enabling the deployment of business quality VoIP and video applications.
Additional features like Multiple BSSIDs, Wireless Roaming,
Auto-channel selection, and Load Balancing, make this solution
ideal for your Business.
Features & Benefits:
Benefits:
- Standards-based POE (IEEE 802.3af) or External DC power
- RangeBooster technology for up to twice the range, reduced
dead spots, and up to 35% more throughput than standard
Wireless-G
- Advanced wireless security using Wi-Fi Protected Access™
(WPA2) with up to 256-bit encryption, and new Security Monitoring
Feature gives your business the visibility and protection
it needs
- Support for WMM provides improved QoS over wireless
connections for better video and voice performance.
Features:
- 10/100 Base-T Ethernet Port, Autosensing half/full duplex
& MDI/MDI-X
- Full backwards compatibility with 802.11b
- Easy installation and configuration
- Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2- ENT
authentication (802.11i ready)
- SMA detachable Dipole antennae with 1x2 MIMO to increase
coverage
- Supports Power over Ethernet (PoE) or external DC power
- Supports 4 BSSID and 802.1Q VLAN to SSID mapping
- Supports SNMP and intuitive Web-based interface
- WMM wireless QoS support
- Supports wireless roaming based on 802.11F (IAPP)
- Supports AP, Bridge Mode and Repeater mode
- Supports wireless security monitoring (working together
with 200 series client cards)
- Supports wireless client isolation 3 year limited warranty
Product View:

Linksys WAP200 Front Panel

Linksys WAP200 Back Panel
Specifications:
|
Wireless-G Access Point
|
|
Specifications |
|
Model Number |
WAP200 |
|
Standards |
IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority),
802.1q (VLAN), 802.1X (Security Authentication),
802.11i - Ready (Security WPA2), 802.11e - Ready
(Wireless QoS), 802.11F (Wireless Roaming) |
|
Ports |
10/100 Base-T Ethernet, 12 VDC Power |
|
Buttons |
Reset |
|
Cabling Type |
UTP CAT 5 |
|
LEDs |
Power, POE, Wireless, Ethernet |
|
Operating System |
Linux |
|
Setup/Config |
|
WebUI |
Built in Web UI for Easy browser-based configuration
(HTTP/HTTPS) |
|
Management |
|
SNMP Version |
SNMP Version 1, 2c, 3 |
|
Event Logging |
E-mail Notification
Remote Syslog |
|
Web F/W upgrade |
Firmware Upgradable Through Web-Browser |
|
Diags: Flash, etc. |
Diags: Flash, RAM, LAN, WLAN |
|
DHCP |
DHCP Client |
|
Operating Modes |
|
Access Point |
Access Point Mode, point-to-point Bridge Mode, point-to-multipoint
Bridge Mode, Repeater Mode |
|
Wireless |
|
Spec/Modulation |
Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM |
|
Channels |
Operating Channels: 11 North America, 13 Most of
Europe (ETSI and Japan) |
|
# of External Ant. |
2 (Omni-Directional) SMA detachable |
|
Transmit Power |
Transmit Power (Adjustable) @ Normal Temp Range:
11b - 18 dBm; 11g - 14 dBm |
|
Antenna Gain in dBi |
2 |
|
Receiver Sensitivity |
11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBM |
|
Security |
|
WEP/WPA/WPA2 |
WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT |
|
Access Control |
Wireless Connection Control: MAC-Based |
|
SSID Broadcast |
SSID Broadcast Enable/Disable |
|
802.1X |
IEEE 802.1X support |
|
Wireless Client Isolation |
Wireless Client devices can be isolated from each
other either within an SSID or between two SSIDs |
|
Wireless Security Monitor |
Scan and Classify wireless devices in the network.
Report new client and AP joining network and suspicious
network events (Works together with 200 Business
series client adapters):
1. Intrusion Alarms (e.g., Rogue Client Detected,
Spoofed MAC address)
2. Denial of Service Alarms (e.g., Duration Attack,
Association Table Full)
3. Vulnerability Alarms (e.g., AP is not using encryption,
AP is broadcasting SSID)
4. Other Alarms (e.g., Low speed connection)
|
|
Quality of Service |
|
QoS |
4 Queues WMM Wireless priority |
|
General |
Wireless roaming based on IAPP Load Balancing Auto-channel
selection |
|
Environmental |
|
Dimensions |
6.69" x 8.07" x 7.68" |
|
WxHxD |
170 x 205 x 195 mm |
|
Unit Weight |
0.88 lb (0.4 kg) |
|
Power |
12V 1A DC input, and IEEE 802.3af Compliant PoE
|
|
Certification |
FCC, ICES-003, CE |
|
Operating Temperature |
32 to 104ºF (0 to 40ºC) |
|
Storage Temperature |
-4 to 158ºF (20 to 70ºC) |
|
Operating Humidity |
10 to 85% noncondensing |
|
Storage Humidity |
5 to 90% noncondensing |
Package Contents:
- Wireless-G Access Point with Power Over Ethernet and
RangeBooster
- 2 x SMA detachable Dipole antenna
- User Guide on CD-ROM
- Ethernet Network Cable
- Power Adapter
- Product Stands
- Registration Card
Minimum Requirements:
- 802.11b, 802.11g Wireless Adapter With TCP/IP Protocol
Installed Per PC
- Switch/Router with Power Over Ethernet (PoE) Support
Or PoE Injector when used with PoE
- Web-Based Configuration Java-Enabled Web Browser
Works Best With:
- WUSB200 - Wireless-G
Business USB Network Adapter with RangeBooster
- WPC200 - Wireless-G
Business Notebook Adapter with RangeBooster
- WMP200 - Wireless-G
Business PCI Adapter with RangeBooster
|
Linksys WAP200 Wireless-G Access Point |
| WAP200 Wireless-G
Access Point |
#WAP200
List Price: $163.00
Our Price: $129.99 |
|
|