Linksys SFE2010 48-port 10/100 Ethernet Switch

Linksys SFE2010 Overview:

48-port 10/100 Ethernet Switch Ethernet switch with 48-port 10/100, 2 10/100/1000 copper ports, and 2 SFP slots

The Linksys WebView Managed switch allows you to expand your network securely. Configuration of the switch is secured using SSL for Web access.

SFE2010 is optimized for maximizing the system availability with fully redundant Stacking, Redundant Power options, and Dual Images for resilient firmware upgrades. The SFE2010 is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure clear and reliable voice and video communications.

The SFE2010 switches provide resilient stacking for up to 4 units or 192 ports. A stack of units is managed as a single switch with one Web Management interface to manage all the units. SFE2010 can coexist in a stack with other Linksys SFE2xxx/P 24-port and 48-port versions - SFE2000, SFE2000P, SFE2010, SFE2010P - for a maximum of 192 ports in a stack.

The stacking functionality includes master/backup unit behaviour, ring and chain architecture, hot insertion and removal of units.

The SFE2010 switches provide an intuitive, secure management interface enabling you to better utilize the comprehensive feature-set of the SFE2010, resulting in a better optimized, more secure network.

Features & Benefits:

Benefits:

Optimized for growing businesses with 4 Gig ports
Fully resilient stacking provides optimized growth with simplified management
Secure management via SSH/SSL and secure user control via 802.1x & MAC filtering
Maximum security and control of traffic with policing, shaping, ACLs, and QoS

Features:

48 - 10/100 Ethernet ports
2 -10/100/1000 Ethernet ports (used as stacking ports if operated in stacking mode)
2 mini-GBIC slots for fiber Gigabit Ethernet expansion
Dual images for resilient firmware upgrades
17.6 Gbps, non-blocking, store-and-forward switching capacity
Simplified QoS management enabled by queuing techniques using 802.1p, Diffserv or ToS traffic prioritization
Power redundancy when used with the RPS1000 Redundant Power Supply unit
Fully-resilient stacking provides optimized growth with simplified management
Access Control Lists (ACLs) for granular security and QoS implementation
Configuration and monitoring from a standard web browser
Secure remote management of the switch via SSH and SSL encryption
802.1q-based VLANs enable segmentation of networks for improved performance and security
Private VLAN edge simplifies network isolation for guest connections or autonomous networks
Automatic configuration of VLANs across multiple switches through GVRP/GARP
User/Network portlevel security via 802.1x authentication and MACbased filtering
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP)
Enhanced rate-limiting capabilities, including back pressure and multicast, broadcast, and flood control
Port mirroring for noninvasive monitoring of switch traffic
Mini Jumbo Frame support (1632 bytes)
SNMP v1, v2c, v3 and RMON support
Fully rack-mountable using included rack-mounting hardware

Product View:

Linksys SFE2010 Front Panel

Linksys SFE2010 Front Panel

Linksys SFE2010 Back Panel

Linksys SFE2010 Back Panel

Specifications:

48-port 10/100 Ethernet Switch
Specifications
Model	SFE2010 48-Port 10/100 Ethernet Switch
Ports	48 RJ-45 connectors for 10BASE-T/100BASE-TX; 2 10BASE-T/100BASE-TX/1000Base-T ports; 2 mini-GBIC ports; console port; auto MDI/MDI-X; autonegotiate/manual setting; RPS port for connecting to redundant power supply unit
Buttons	Reset button
Cabling Type	UTP CAT 5 or better for 10BASE-T/100BASE-TX; UTP CAT 5e or better for 1000BASE-T
LEDs	PWR, Fan, Link/Act, Speed, RPS, Master, Stack ID 1 - 8
Performance
Switching Capacity	17.6 Gbps non-blocking
Forwarding Capacity	13M packets per second (64-byte packets)
Stacking
Stack Operation	Up to 192 ports in a stack Hot insertion and removal Ring and chain stacking options Master and backup master for resilient stack control Auto-numbering or manual configuration of units in stack
Layer 2
MAC Table Size	8K
Number of VLANs	256 active VLANs (4096 range)
VLAN HOL Blocking	Port-based and 802.1q tag-based VLANs; protocol-based VLAN; management VLAN; multicast TV VLAN; private VLAN Edge (PVE); GVRP Head-of-line blocking prevention
Layer 3
Layer 3 Options	Static routing; Classless Interdomain Routing (CIDR); 60 static routes; IPv4 and IPv6; Forwarding in silicon - wirespeed forwarding of Layer 3 traffic
IPv6
IPv6 Options	IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with ISATAP tunnel, IPv6 Neighbor Discovery, IPv6 Stateless Address Configuration, MTU Discovery, WEB, SSL, Telnet, Ping, Traceroute, SNTP,TFTP, SNMP, RADIUS, ACL, QoS, Protocol Based VLANs
Management
Web User Interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP	SNMP version 1, 2c, and 3 with support for traps
SNMP MIBs	RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB, RFC1493 Bridge MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3, and 9 only), RFC2737 Entity MIB, RFC 2618 RADIUS Client MIB, RFC 1215 Traps
Remote Monitoring (RMON)	Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis)
Firmware Upgrade	Web browser upgrade (HTTP/HTTPS) and TFTP Dual images for resilient firmware upgrades
Port Mirroring	Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe.
Other Management	Traceroute; single IP management; SSL security for web user interface; Secure Shell (SSH); RADIUS; port mirroring; TFTP upgrade; DHCP client; BootP; SNTP; Xmodem upgrade; cable diagnostics; PING; syslog; Telnet client (SSH secure support)
Security
IEEE 802.1x	802.1x - RADIUS authentication, MD5 Hash; guest VLAN; single/multiple host mode
Access Control Lists (ACLs)	Drop or rate limit based on source and destination MAC or IP address, protocol, port, VLAN, DSCP/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, ICMP packets, IGMP packets, DHCP snooping, ARP inspection, and IP source address guard, up to 1018 rules
Availability
Link Aggregation	Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm Control	Broadcast, multicast and unknown unicast
DOS prevention	DOS attack prevention
Spanning Tree	IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree,
	IEEE 802.1s Multiple Spanning Tree, and fast linkover
IGMP (version 1 and 2)	Limits bandwidth-intensive multicast traffic to only the requestors and
Snooping	supports 256 multicast groups
Power Redundancy	Connection to RPS unit for power redundancy
Quality of Service
Priority Levels	4 hardware queues
Scheduling	Priority queuing and weighted round robin (WRR)
Class of Service	Port-based; 802.1p VLAN priority-based; IPv4/v6 IP Precedence/TOS/DSCP-based; Diffserv; Classification and Re-marking ACLs
Rate Limiting	Ingress policer; egress rate control; per VLAN
Statistics	16 meters
Standards
	802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x Flow Control, 802.3ad; 802.1D STP, 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1x Port Access Authentication
Environmental
Dimensions	17.32 x 14.70" x 1.73" (440 x 375 x 44 mm) "
Weight	10.89 lb (4.94 kg)
Power	100-240V 47-63Hz, Internal, Universal; also equipped with external
	redundant power supply connector for external power supply, -48VDC
Certification	UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47)
Operating Temp.	32 to 104°F (0 to 40°C)
Storage Temp.	-4 to 158°F (-20 to 70°C)
Operating Humidity	10 to 90%, relative, non-condensing
Storage Humidity	10 to 95%, relative, non-condensing

Package Contents:

One SFE2010 Ethernet Switch
One AC power adapter with power cord
Two rack-mounting kits with 8 screws
One CD-ROM with user documentation (PDF) included
One registration card
Console cable

Minimum Requirements:

Web browser—Mozilla Firefox version 1.5 or later; Microsoft Internet Explorer version 5.5 or later
Cat5 Ethernet Network Cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
Provider support for CPE software version 1.2 or higher

Work Best With:

SFE2010P - 48-port 10/ 100 Ethernet Switch with PoE
SFE2000P - 24-Port Managed/Stackable Ethernet Switch with PoE
SFE2000 - 24-Port 10/100 Ethernet Switch
RPS1000 - 380W Redundant Power Supply Unit

Documentation:

Download the Linksys SFE2010 48-port 10/100 Ethernet Switch (PDF).