Linksys SFE1000P 8-port 10/100 Ethernet Switch with PoE

Linksys SFE1000P Overview:

8-port 10/100 Ethernet Switch with PoE Linksys One Ready, Secure, reliable, managed Ethernet switching with PoE

The SFE1000P is an 8-port fully managed 10/100 Ethernet switch with two Gigabit copper or optical interfaces for connecting to a core switch. It is Linksys One Ready allowing it to be used in both Linksys One and non-Linksys One networks. The combination of its intelligence, small size and fanless design make it ideal for a small office, conference room or training room.

For Wireless or VoIP deployments, the SFE1000P supports IEEE802.3af standard for Power over Ethernet. With automatic load sensing, the power control circuitry automatically detects Power over Ethernet on end-device before providing power. (Power over Ethernet limited to the fixed 10/100 Base-T/TX ports.) The solution can provide maximum output power per PoE port up to 15.4W on 4 ports or 7.5W per PoE port on 8 ports simultaneously. Independent overload and short-circuit protection for each port. LED indicators for power status per PoE port.

With the enhanced quality of service (QoS) and traffic management features in the SFE1000P, voice and video data can be prioritized, ensuring clear and reliable voice communications. An intuitive, secure management interface enabling you to easily set up the QoS parameters, along with the other advance security and performance features, resulting in a better optimized, more secure network.

Linksys One integrates data networking and low-cost Voice-over-IP (VoIP) service with applications and other business services into one simple solution for small business. Because the SFE1000P is Linksys One Ready, it can be seamlessly integrated into a Linksys One data or data/voice network. Linksys One technology is automatic and self-configuring. Once connected, a Linksys One Service Router will discover the SFE1000P, automatically configure it and make it available to other users on the network.

Features & Benefits:

Benefits:

Provides IEEE 802.3af PoE power to IP phones, cameras, or APs
Dual gigabit uplinks provide increased bandwidth and redundancy
Maximum security and control of traffic with policing, shaping, ACLs, and QoS
Linksys One Ready - simple, automated installation with Linksys One Services Routers present.

Features:

8 - 10/100 switched RJ-45 ports deliver up to 200 Mbps of throughput per port
2 - 10/100/1000 switched RJ- 45/Mini-GBIC combo ports
PoE on the 10/100 ports supply up to the IEEE 802.3af maximum—15.4W per port for up to 4 ports, or 7.5W per port on 8 ports
5.6 Gbps non-blocking, store-and-forward switching mechanism
Simplified QoS management enabled by queuing techniques using 802.1p, Diffserv or ToS traffic prioritization specifications
WebView management allows switch configuration and monitoring using a standard web browser
Secure remote management of the switch via SSH and SSL secure channel network protocols
802.1q-based VLANs enable segmentation of networks for improved performance and security
Private VLAN edge simplifies network isolation for guest connections or autonomous networks
Automatic configuration of VLANs across multiple switches through GVRP/ GARP
Automatic MDI/MDIX detection support
User/Network portlevel security via 802.1x authentication and MACbased filtering
Increased bandwidth (up to 8x) and link redundancy with Link Aggregation Control Protocol (LACP)
Enhanced rate-limiting capabilities, including back pressure to control the rate of data flow into and out of a port
Provides multicast, broadcast, and flood control
Port mirroring for noninvasive monitoring of switch traffic
Jumbo frame support - up to 1632 bytes
Supports SNMP v1, v2c, and v3
Fully rack-mountable using included rack-mounting hardware

Product View:

Linksys SFE1000P 8-port 10/100 Ethernet Switch with PoE

Specifications:

8-port 10/100 Ethernet Switch with PoE
Specifications
Model	SFE1000P
Ports	8 RJ-45 connectors for 10BASE-T and 100BASE-TX 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots Console port Auto MDI/MDI-X Auto-negotiate/Manual setting
Buttons	None
Cabling Type	UTP CAT 5 or better for 10BASE-T/100BASE-TX UTP CAT 5e or better for 1000BASE-T

LEDs	10/100 Link/Act, PoE, 2 Giga Link/Act, Speed, System
Power over Ethernet
802.3af Complaint	Supplies up to IEEE standard maximum of 15.4W on 4 10/100 ports or up to 7.5W on 8 10/100 ports
Performance
Switching Capacity	5.6 Gb non-blocking
Forwarding Rate	4.17 Mpps wire-speed performance
Layer 2
MAC Table Size	8K
Number of VLANs	256 active VLANs (4096 range)
VLAN	Port-based and 802.1q tag-based VLANs; Management VLAN
HOL Blocking	Head-of-line blocking prevention
Management
Web User Interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP	SNMP version 1, 2c, and 3 with support for traps
SNMP MIBs	RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB, RFC1493 Bridge MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1,2,3,9 only), RFC2737 Entity MIB, RFC 2618 RADIUS Client MIB, RFC 1215 Traps, and Private PoE MIB
Remote Monitoring (RMON)	Embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis)
Firmware Upgrade	Web browser upgrade (HTTP) and TFTP
Port Mirroring	Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe.
Other Management	Traceroute Secure Socket Layer (SSL) Secure Shell (SSH) RADIUS SSL security for web user interface DHCP client BootP SNTP Xmodem upgrade Cable diagnostics PING Telnet client (SSH secure support)
Security
IEEE 802.1x	802.1x - RADIUS authentication, MD5 encryption
Access Control Lists (ACLs)	Drop or rate limit based on source and destination MAC or IP address, protocol, TOS/DSCP, port, VLAN, and Ethertype
Availability
Link Aggregation	Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm Control	Broadcast, multicast and unknown unicast
Spanning Tree	IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, and IEEE 802.1s Multiple Spanning Tree
IGMP (v1/v2) Snooping	Provides for fast client joins and leaves of multicast streams and limitsbandwidth-intensive video traffic to only the requestors Supports 256 multicast groups
Quality of Service
Priority Levels	4 hardware queues
Scheduling	Priority queuing and weighted round robin (WRR)
Class of Service	Port-based 802.1p VLAN priority-based IPv4/v6 IP Precedence/TOS/DSCP-based TCP/UDP port-based Diffserv Classification and Re-marking ACLs
Rate Limiting	Ingress policer Egress rate control
Standards
	802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x Flow Control, 802.3 ad LACP,802.3af PoE, 802.1D STP, 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1x Port Access Authentication
Environmental
Dimensions	12.01 x 1.73" x 6.69" (305 x 44 x 170 mm) "
Weight	3.02 lb (1.37 kg)
Power	External AC power adapter
Certification	FCC Part15 Class A, CE Class A, UL, cUL, CE mark, CB
Operating Temp.	32 to 104°F (0 to 40°C)
Storage Temp.	-4 to 158°F (-20 to 70°C)
Operating Humidity	10 to 90%, Non-condensing
Storage Humidity	10 to 95%, Non-condensing

Package Contents:

One SFE1000P with 8 10/100 Base-T and 2 Gig combo ports with SFP or RJ-45
One AC power adapter with power cord
Two rack-mounting kits with 8 screws
One CD-ROM with User Guide (PDF) included
One registration card
Console cable

Minimum Requirements:

Web-based configuration—Java-enabled web browser
Cat5 Ethernet network cable
TCP/IP, network adapter, and network operating system (such as Microsoft Windows or Linux) installed on each computer in the network

Work Best With:

MGBT1 - Gigabit Ethernet 1000 Base-T Mini-GBIC SFP Transceiver
MGBSX1 - Gigabit Ethernet SX Mini-GBIC SFP Transceiver
MGBLH1 - Gigabit Ethernet LH Mini-GBIC SFP Transceiver

Documentation:

Download the Linksys SFE1000P 8-port 10/100 Ethernet Switch with PoE (PDF).